Samsung iDCS500 User Manual

Also see for iDCS500: Programming manual General description User guide User guide Manual

Contents

Samsung iDCS500 DCS (Euro) Keyset User Guide– 12 –INTERNAL CALLSCALLING OTHER EXTENSIONS1. Dial the extension number or group number.2. Wait for the party to answer. If you hear a brief tone burst instead of ring-back tone, the extension you called is set for Voice Announce or AutoAnswer. Begin speaking immediately after the tone.3. Finish the call by replacing the handset or pressing the ANS/RLS key.Note:• If you have a DSS key assigned to an extension or an extension group, youcan press this key instead of dialling the number.• If the Hot Keypad feature has been turned off, you must first lift the handset orpress the SPEAKER key before you begin dialling.ANSWERING INTERNAL CALLSYour keyset can answer internal calls in one of three modes: Ring, VoiceAnnounce or Auto Answer. Ring mode is the default mode.n RING MODE1. When your keyset rings, simply lift the handsetORPress the ANS/RLS key to be connected to the calling extension.2. Finish the call by replacing the handset or pressing the ANS/RLS key.See Ring Preference in the section “Customising Your Keyset”.n VOICE ANNOUNCE MODEWhen another extension calls you, your keyset will sound a brief attentiontone and you will hear the caller's announcement.1. Press the ANS/RLS key to turn on the microphone and speak hands-free.ORLift the handset to reply.