Samsung iDCS500 User Manual

Also see for iDCS500: Programming manual General description User guide User guide Manual

Contents

Samsung iDCS500 DCS (Euro) Keyset User Guide– 31 –MANUAL RETRY WITH REDIAL(‘L’ VERSION SYSTEMS ONLY)When you are on an outside call and you receive a busy signal and you wantto redial the same number:ß Press the REDIAL key.This will hang up your existing call and manually redial the same number.You can repeat this operation for a limited number of attempts.SAVE NUMBER WITH REDIALTo save the outside number you just dialled for later use, before hanging up:ß Press the SNR key.ORPress the SCROLL key and select the SAVE soft key.To redial this saved number at any time, press the SNR key or dial 17.Note:• If the Hot Keypad feature has been turned off, you must first lift the handset orpress the SPEAKER key before you begin dialling.• The saved telephone number is stored in memory until you save a nother.• Redial does not apply to internal calls.CHAIN DIALLINGYou can manually dial additional digits following a speed dial number or chainas many speed dial numbers together as required.• After the first speed dial number is answered, press the MEMORY keyagain (or SPD key if assigned) and dial another speed number ORmanually dial additional digits following a speed dial number.AUTOMATIC REDIAL/RETRYWhen you are making an outside call and you receive a busy signal, the sys-tem can automatically redial the number for you. It will automatically redial ata pre-programmed interval for up to 15 attempts. You must have a RETRYkey programmed to use this feature.