Samsung iDCS500 User Manual

Also see for iDCS500: Programming manual General description User guide User guide Manual

Contents

Samsung iDCS500 DCS (Euro) Keyset User Guide– 59 –CALL DURATION TIMERThe system can be set to time outside calls automatically. A few secondsafter you dial a telephone number, the timer will appear in the display. (It ap-pears immediately for incoming calls.) See Auto Timer, below.To manually begin timing a call, you can use the Timer function. See TimerFunction, below.n AUTO TIMERYou can have the timer automatically start when you answer incoming calls,or after a short delay on an outgoing call.1. While on-hook, dial TRSF 110.2. Dial 011 to turn the auto timer on or 010 to turn it off.3. Press the TRSF key to store your selection.The call timer displays in minutes and seconds for the duration of the call. Ifa call lasts longer than 99 minutes 59 seconds, the timer restarts.n TIMER FUNCTIONYou can manually time your calls or use this feature as a simple stopwatch.1. When the keyset is idle, press the TIMER key or select TIMER from theOTHER menu. The timer shows in the display.2. Press the TIMER key (or TIMER soft key) to stop the timer.3. Lift the handset and replace it. The display will return to normal.Note: If you attempt to start the timer manually while the automatic timer is on, thecall duration timer is restarted.n CALL COSTIf your phone system is programmed to display call costs, you can have thecall charge automatically displayed on the LCD when you make a call.1. While on-hook, dial TRSF 110.2. Dial 071 to turn the call cost on or 070 to turn it off.3. Press the TRSF key to store your selection.