11Creating a program file [Program Editor]Network Viewer 5 (Program Editor) is a tool to make a program file which specifies the display orderof the images and its file path in the file server (FTP server). The Program Editor creates a folder"DispParam" at the login root directory in the FTP server, and files with each program name intothis folder. These files are called "Program". By specifying the program file with the Network Viewerfunction, you can display the images in programmed order with the projector .Procedure of making program1 To start up the Program Editor, click "Network Viewer 5 (ProgramEditor)" menu from "Start" - "All Programs" - "Network Viewer &Capture 5" menu.2 Click Connect button.3If the connection setting window appears, enter the each item andthen click OK button.The setting window disappears and then the programs arelisted on the window if there are program files at the logindirectory in the connected FTP server.IMPORTANTIt is required to set the write permission mode for the login directory of the FTP server.In the read only mode, you will have an error when you register a new program.Item DescriptionHost name ................Enter the FTP server name or IP addressRoot Folder.....................Specify the root directory of the FTP server. Normally use "/".User ID .......................Enter your login account of the FTP sever or use blank when you login as anonymous accountfor the FTP serverPassword...................Enter your password (PIN code) or use blank when you login as anonymous account.Creating a program file [Program Editor]
