0Chapter 7 Controlling the projectorItem DescriptionContrast.....................Adjusts picture contrastBrightness ................Adjusts picture brightnessColor ...........................Adjusts picture color saturationTint ..............................Adjusts picture hueImage adjustmentThis function is to adjust the projected picture image and save the image mode. To store the adjustedvalue, click Store button, and to load the adjusted value, click Load button.Item DescriptionColor temp. ..............Sets a color temperature mode.White balanceRed, Green,Blue ......................Adjusts each white balance respectively.Sharpness .................Adjusts picture sharpness.* When the value of the white balance is changed, the color temp. indicates"Adj."Item DescriptionGamma........................ Adjusts brightness of darker part of the picture.Noise reduction .......Switches noise reduction modeProgressive ..................Switches progressive modeReset...........................Resets the Image adjustment to previous levels.Store ...........................Stores the Image adjustment values. Select an item[Image 1 - Image 4] from the pull-down menu and clickStore button.Load............................Loads the Image mode.Select an image mode fromthe pull-down menu andclick Load button. Theremay not be available modedepending on the inputmode as shown in the tableleft.Input sourceImage mode Video ComputerDynamic 4 4Standard 4 4Real * 4Cinema 4 *Blackboard(Green) 4 4Colorboard 4 4Image 1 - 4 4 4✐ The mark "4" indicates the available image mode in the selected inputsource. The error message appears when the disabled image modeindicated with "*" is selected.
