rThis software is to project the computer screen via the networks.Select "All Programs" from the start menu --> Network Viewer & Capture 5" -->"Network Capture 5", then following screen will appear. Then the program will start.Parts Names and Functions of the Screenq Search PJ buttonSearch the projector connected to the networks.w Specify IP buttonWhen connected to a different segment network, the projector can not be retrieved automatically.In that case, press this button, the "Search specified IP address list" window appears, and thenclick Add button and enter the IP address directly to specify the projector in another window. Theregistered multiple IP addresses can be searched at a time.e Wireless easy setting button / Wireless easy release buttonConfigure the Wireless LAN setting just by clicking this button. (The setting will be stored as AdHocsystem) For details, refer to "5. Wireless LAN configurations"-->"Easy wireless setting" (p.41). Torestore the easy setting, press the Wireless easy release button.r Network Projector ListDisplay all the projectors connected to the networks.Show unoccupied projector as “On standby” and occupied projector as “Real time capturing” or "InOne-shot mode". When registered in a moderator’s group, "On Moderator mode" will be shown.The indication of the status of use with "#" indicates that your computer is now using the networkcapture function. After double-clicking on a projector name, the web browser gets activated andthe projector setup screen will be displayed.Network Capture 5 windowq woi!0!1 !3ty!2uNetwork Capture 5 window!4e
