Configuring wireless LAN setting and security settingConfigure the wireless LAN setting and security setting for Wireless 4 and Wireless 5.Configuring wireless LAN setting1. Click page [2] of setting pages. Following wireless LAN setting can be done. After completing theconfiguration, press Set button.Item DescriptionWireless Mode ........Select the Communication standard 802.11b or 802.11b/g/n.Network Type. .........Select either “Infrastructure” or “AdHoc”. When selecting the "AdHoc", the security"WPA-PSK" and "WPA2-PSK" mode are not available.SSID/ESSID ...............Set the SSID/ESSID. (up to ASCII 32 characters)SSID/ESSID is case-sensitive. Even though all characters on the Wirelessinformation is uppercase, it is necessary to distinguish between upper case andlower case characters.Channel .....................If you use the projector in 802.11AdHoc mode, select the channel, from 1 to 11.Configuring wireless LAN setting and security settingNotes for entering characters:The “¥” symbol is displayed as “\” when the ASCII key is used. The “]” symbol is treated as a characterby the ASCII key, but it is not interpreted as a character by the HEX key. In HEX, the “]” symbol isdisplayed in red and setting is denied.You can not set all the characters with the “]” symbol. It will be considered as no operation.ASCII key characters : Space - 0 to 9 A to Z a to z ! " # $ % & ' ( ) * + , . / : ; < = > ? @ [ ¥ ] ^ _ ` { | } ~HEX key characters : 0 to 9 a to f
