Chapter 4 Wired LAN configurationsThe Network PIN code is to restrict the access from the networks to the projector.After setting the Network PIN code, you need to enter it to operate the projector via the networks.Network PIN codeNetwork information1. Select "Network PIN code" in the Network menu, and press SELECT button.The Network PIN code screen will appear.2. Set the Network PIN code.Set the figures with the Point ed buttons and move to the next items with the Point 7 8 buttons.Select “Set” and press SELECT button to set. To cancel the preset Network PIN code, select “Cancel”.When you do not want to set the Network PIN code, set 0000.It is recommended to set the Network PIN code if you use the projector via the networks. The NetworkPIN code can be set also through the networks. See “6. Basic setting and operation” ➔ “Initial setting”➔ “Network PIN code setting” (p51).Select "Network information" in the Network menu and press Point 8 or SELECT button to show LANsetting environment of the currently selected projector. (The description below is an example anddifferent from what will be shown.)Network PIN codeNetwork PIN code screen
