Chapter 6 Basic setting and operation1. Turn on the projector.2. Start up the Network Capture 5. The Network Capture 5 searches projectors in the network and listsup the IP address or projector name of the projector on the Network Projector List.3. Double click the projector to set from the Network Projector List.4. The web browser will start up and display the setting page of the projector.Select a display mode and loginThis product provides 2 types of control mode, Standard Mode and Light Mode as below. Selecta proper mode to match your PC and network environment by clicking on the text link. Once youselect your desired display mode, the setting page you selected display mode will be displayedautomatically from the next login. To change the display mode, click "Top" on lower-right corner ofthe setting page (p.47).STANDARD MODE For computer display, displays graphicalm e n u s a n d s e t t i n g s. Th i s m o d e i srecommended for standard use.LIGHT MODE Displays with 200 x 300 dots. This modeis optimized for use of the handheldcomputer, PDA, etc. It is also convenientif the network traffic is heavy. (This modehas some limitations on the networkviewer and multi-control functions.)If the password has been set on the setting page, theauthentication window will appear. In that case, type "user"onto the User Name text area and the login Network PINcode onto the Password text area and then click OK button.* The entered User Name must be "user" and it can not be changed.[Note]When the projector is accessed for the first time or the Network PINcode "0000" is set, the auto-login is performed and the next main setting page is displayed.Starting up the Browser
