Select "Network" as input mode previously.1 Access to the control page of the projector by using the webbrowser. From the Network menu, click Capture tab to displaythe setting page.2 Select the computer number from the pull-down menu buttonof "Connecting PC" and click Start button. The screen image ofthe selected computer will appear on the projected screen inreal time.• To stop capturing, click One-shot button. The captured imageof the computer on the screen is frozen.• To restart capturing, click Start button.3 To end capturing, click End button.✐ The IP address of the connecting PC should be registered previously (+ p.91).✐ If the error message appears, check item "Parameter set up" (+ p.90).✐ To use the capture function from the web browser or projector, the Network Capture 5 on the captured computermust be activated.PC4PC3 PC6CapturePC5PC2PC1* PC provides the Network Capture.Project a screenimage of PC1 withPJ2.PJ2PJ1* Star t capturing oft h e P C1 f r o m t h ePC5.[2] Control by the web browserSet "On" whenusing the wirelessmouse functionUsing the real time captureItem DescriptionInterrupt connection...............Set enable or disable the real time capturingconnection from other computers during executingthe real time capturing operation.
