Sanyo DSR-3000P Instruction Manual

Also see for DSR-3000P: Manual guide

Contents

Sanyo DSR-3000P Instruction Manual Manual pdf 43 page image

VIDEO INPUT SET SETTINGIf you select a multiplexer (sold separately) that is connected to the digital video recorder, you can set the type of image input (digital or analog).MULTIPLEXER setting(default setting: NO USE)1 Press the MENU button to select VIDEO INPUT SET, andthen turn the shuttle dial clockwise.The VIDEO INPUT SET sub-menu appears, and the cursormoves to MULTIPLEXER.2 Turn the shuttle dial clockwise.“NO USE” flashes.3 Turn the jog dial to select the MULTIPLEXER setting(example: “SANYO”), and then turn the shuttle dialclockwise.Display examples:• NO USE: When not using a multiplexer• SANYO: When using a Sanyo multiplexer• OTHERS1: When using a Sony multiplexer• OTHERS2: When using a Robot or DM multiplexerThe cursor moves to VIDEO INPUT.Note: The multiplexers specified by SANYO and OTHERS1 arecapable of decoding channel information. Accordingly, youcan record images from these multiplexers using this digitalvideo recorder, and then use the digital video recorder’sCHANNEL button to select a camera number (channelinformation) for playback.VIDEO INPUT setting(default setting: ANALOG)This sets whether the image signals that are being input to thevideo input terminals of this digital video recorder are digital oranalog.1 When the cursor is at the VIDEO INPUT setting, turn theshuttle dial clockwise.“ANALOG” flashes.2 Turn the jog dial to select “DIGITAL (example)”, and thenturn the shuttle dial.The cursor moves to MULTIPLEXER.Note:• Select this if a Sanyo digital transport multiplexer(MPX-CD163P or CD93P) has been connected digitally.• When making a multiplexer and a digital connection, firstconnect the VIDEO OUT connector of this unit to themonitor, and then set the input signal to “DIGITAL”.3 Press the EXIT/OSD button.The display returns to the normal screen.Note:• If the MULTIPLEXER setting is set to something other than “NOUSE”, SENSOR cannot be selected as the ALARM TRIGGERin the ALARM REC MODE SET menu.When using a multiplexer, use the motion sensor function of themultiplexer.• If using a multiplexer manufactured by SANYO or some othermanufacturer in analog connection mode, connect the SW OUTterminal at the rear of this unit to the SW IN terminal of themultiplexer. This is not necessary if using a SANYO multiplexerin digital connection mode. INPUT SET>MULTIPLEXER : NO USEVIDEO INPUT : ANALOGMain menu 1 Sub-menus MENU 1>1.LANGUAGE/CLOCK SET ->2.VIDEO INPUT SET ->3.RECORDING AREA SET ->4.RECORDING CONDITIONS SET ->5.NORMAL REC MODE SET ->6.TIMER SET ->7.HOLIDAY SET ->8.ALARM REC MODE SET ->TO MAIN MENU 2 ->MOVE LINES WITH JOG. SELECT WITH SHUTTLESets the manufacturer of the connectedmultiplexer.Sets the video input.MENU INPUT SET>MULTIPLEXER : NO USEVIDEO INPUT : ANALOG INPUT SET>MULTIPLEXER : NO USEVIDEO INPUT : ANALOG INPUT SET>MULTIPLEXER : SANYOVIDEO INPUT : ANALOG12 INPUT SET>MULTIPLEXER : SANYOVIDEO INPUT : ANALOG INPUT SET>MULTIPLEXER : SANYOVIDEO INPUT : DIGITAL12EXIT/OSD42 English