Sanyo DSR-3000P Instruction Manual

Also see for DSR-3000P: Manual guide

Contents

Sanyo DSR-3000P Instruction Manual Manual pdf 45 page image

RECORDING AREA SET SETTING6 Turn the shuttle dial counterclockwise.The screen changes to show a “WARNING” display. This is amessage to warn you that the hard disk is about to bereinitialized.7 To reinitialize the hard disk, turn the jog dial to display“YES”, and then turn the shuttle dial clockwise.The RECORDING AREA SET screen appears and therecording capacities for each area are changed.Note: If you turn the shuttle dial clockwise when “NO” is selected,the RECORDING AREA SET screen appears and therecording capacities return to their previous settings. Thehard disk is not reinitialized in this case.AREA FULL RESET settingWhen the normal recording area and alarm recording area of thehard disk become full, the images in the recording areas will beautomatically overwritten, starting from the oldest images that havebeen recorded.However, you can change this setting to prevent overwriting ofimages when the recording areas become full, at times such aswhen you want to check or edit the recorded images. In this caseyou need to specify each time that you want images to beoverwritten in each recording area. The following proceduredescribes the method of doing this.1 Set the OVERWRITE setting for the NORMAL RECORDINGAREA or ALARM RECORDING AREA to “OFF” in theRECORDING CONDITIONS SET menu.This setting can be used to display the remaining recordingarea of the hard disk on the screen. At the same time, theFULL or ALARM FULL indicator at the front of the digital videorecorder will flash.When writing to the hard disk is complete, you can useplayback operations to check the recordings.2 Use the jog dial to move the cursor to the AREA FULLRESET → setting for the NORMAL RECORDING AREA,and then turn the shuttle dial clockwise.“NO” flashes on the WARNING screen.3 Use the jog dial to change “NO” to “YES”, and then turnthe shuttle dial clockwise.The NORMAL RECORDING AREA is set to single overwriting.4 Follow the same procedure to make the setting for theALARM RECORDING AREA.5 Press the EXIT/OSD button.The display returns to the normal screen.Note:• For overwriting to be carried out automatically, change theOVERWRITE setting for the NORMAL RECORDING AREA orALARM RECORDING AREA to “ON”.• If AREA FULL RESET is carried out, the normal recording area,alarm recording area and archive area will all be reinitialized,and it will no longer be possible to play back any images thathave already been recorded.THIS CHANGE WILL INITIALIZE THE DISK.ALL RECORDING WILL BE ERASED.ARE YOU SURE ?NOCHANGE WITH JOG. SET WITH SHUTTLETHIS CHANGE WILL INITIALIZE THE DISK.ALL RECORDING WILL BE ERASED.ARE YOU SURE ?YESCHANGE WITH JOG. SET WITH SHUTTLE CONDITIONS SET>DIGITAL SERIES RECORDING : OFFTOTAL NUMBER : **RECORDING NUMBER : **NORMAL RECORDING AREAOVERWRITE : ONALARM RECORDING AREAOVERWRITE : ONREMAINING DISK WARNING : ** AREA SET>TOTAL CAPACITY : 80GBNORMAL RECORDING AREA : 80 %AREA FULL RESET ->ALARM RECORDING AREA : 19 %AREA FULL RESET ->ARCHIVE AREA : 1 %AREA FULL RESET ->CAUTION : WHEN THE AREA SETTING IS CHANGED.THE WHOLE AREA WILL BE INITIALIZED !AREA FULL RESETNORMAL RECORDING AREAARE YOU SURE ?NOCHANGE WITH JOG. SET WITH SHUTTLEEXIT/OSD44 English