Sanyo DSR-3000P Instruction Manual

Also see for DSR-3000P: Manual guide

Contents

Sanyo DSR-3000P Instruction Manual Manual pdf 6 page image

PART NAMESFront panel1 POWER indicatorIlluminates when the power cord plug is inserted into a wall outlet.Flashes when there is a problem with the hard disk or fan.2 FULL indicatorFlashes when the remaining space in the normal recording areaof the hard disk drops to 1%*. (* This can be changed using themenu settings.)3 ALARM FULL indicatorFlashes when the remaining space in the alarm recording area ofthe hard disk drops to 1%*. (* This can be changed using themenu settings.)4 LOCK indicatorIlluminates when the security lock is engaged and operations arelocked.If a button is pressed while the lock is engaged, the buzzersounds and the indicator illuminates.5 ALARM indicatorIlluminates during pre-alarm recording.Flashes during alarm recording.6 MENU button and indicatorUsed to display the menu screens (setting screens).7 ZOOM button and indicatorUsed to display the zoom screen during monitoring and playback.The indicator illuminates when the zoom screen is displayed.This does not operate when a multiplexer is connected digitally inseries.8 CHANNEL button and indicatorIf the digital video recorder is connected to a Sanyo multiplexerthat allows decoding of channel information (camera numbers),channels can be specified so that only those channels are playedback. The indicator illuminates during playback. The CHANNELbutton can only be used during still mode.9 REC/STOP button and indicatorUse to start normal recording.The indicator illuminates during recording.If the button is pressed for 2 seconds or more during recording,recording stops and the indicator switches off.F EXIT/OSD button and indicator• When a menu screen is displayedThe main menu or sub-menu is exited.• During recording or playbackWhen the button is pressed during recording or playback,superimposed information such as time and date and alarmstatus changes in the following order:Displayed at top-left → Displayed at bottom-left → Displayedat top-right → Displayed at bottom-right → Off.The indicator illuminates while information is displayed.G SEARCH FRAME/FIELD button and indicator• During recording or when stoppedWhen the button is pressed during recording or when thedigital video recorder is stopped, the indicator illuminates andsearch playback is possible.• During playbackWhen the button is pressed during playback, the indicatorilluminates and the mode change to frame/field playbackmode.H COPY button and indicatorUsed to copy images to the archive area of the hard disk or to aCompactFlash card or microdrive.The indicator illuminates during copying.I TIMER button and indicatorWhen the button is pressed when recording is stopped, the digitalvideo recorder switches to timer recording standby mode, andwhen the setting time is reached, timer recording starts.J PLAY/STOP button and indicatorWhen the button is pressed, the indicator illuminates andplayback of images in the normal recording area starts.If pressed during playback, playback stops.K STILL button and indicatorWhen this button is pressed during playback, the indicatorilluminates and playback pauses. If it is pressed again, playbackresumes.L SHUTTLE HOLD button and indicatorThis locks the speed for playback and frame advance.The indicator illuminates while locked.M ALARM buttons (û ALARM ù)When these buttons are pressed during playback, playback skipsto the previous or next alarm recording.N Jog (inner) and shuttle (outer) dials• During playbackThe jog dial changes the playback speed.The shuttle dial fast-forwards and rewinds.• Menu screensThe jog dial moves the cursor and changes settings.The shuttle dial accepts settings.O CompactFlash card slotInsert a CompactFlash card or microdrive here.P MENU RESET buttonReinitializes menu settings.POWER FULL ALARM FULL LOCK ALARMMENU EXIT/OSD PLAY/STOPZOOM SEARCHFRAME/FIELD STILLCHANNEL COPY SHUTTLE HOLDREC/STOP TIMER ALARMJOGSHUTTLEENTERCLEAR1 2 3 4 5 786 FGJK N9 IH M LOPEnglish 5