Sanyo DSR-3016P Instruction Manual

Also see for DSR-3009P: Manual Manual for remote operation

Contents

Sanyo DSR-3016P Instruction Manual Manual pdf 21 page image

RECORDING IMAGES IN THENORMAL RECORDING AREANormal recordingImages can be recorded in the normal recording area while they are being monitored.If the time has not been set, the digital video recorder cannot make recordings. Be sure to set the time. (See page 44.)1 Setting the timePress the MENU button to display the LANGUAGE/CLOCK SETmenu, and set the date and time. After the setting has been made,press the EXIT/OSD button, the date and time appear in theoperating display. (See page 44.)Note: If the “PROGRAM REC SET” setting is set in the menu screen,program recording of the images for each camera will bepossible. (See page 55.)2 Press the REC/STOP button.“REC” appears in the operating display and the images beingmonitored are recorded in the normal recording area. Recording ontothe hard disk proceeds automatically (default setting) according to thefollowing settings. The settings can be changed between long-periodrecording and high-quality recording in five steps. (See page 55.)• Hard disk recording areas:Normal recording area: 80%Alarm recording area: 19%Archive area: 1%• Picture quality: EN (Enhanced)• Recording speed: 8.33 FPS (81H)Note: Playback is possible during recording. When the PLAY/STOPbutton is pressed during recording, “c” appears in theoperating display and images are played back from the pointwhere recording began.3 Press and hold the REC/STOP button for 3 seconds or more.The “REC” in the operating display disappears and recording stops.MENU ENGLISH SET>01-01-2002 TUE 00:00:00 TIME SET>MODE : USEWEEK MONTH TIMEON LST-SUN 03 02:00OFF LST-SUN 10 02:00 SET>ADJUST.TIME 01:00REC/STOP 01REC REPEAT EN 27-10-02 10:48:3801EN 26-10-02 11:02:28Recording start timeREC/STOPGreen → RedMonitored imagesare recorded.20 English