Sanyo DSR-3016P Instruction Manual

Also see for DSR-3009P: Manual Manual for remote operation

Contents

Sanyo DSR-3016P Instruction Manual Manual pdf 73 page image

GENERAL SETTING3 Use the jog dial to enter “H” , and then turn the shuttle dialclockwise.The cursor will move to the right. Repeat the above procedure toenter the title “HALL-1F”.Note: To change the title, turn the shuttle dial clockwise so that thecursor moves to the character to be changed, and then re-enterthe character.Note: The following characters can be used in titles.• Alphabetic characters: A – Z• Numerals: 0 – 9• Symbols: -, :, ., /, *, [space]4 Press the EXIT/OSD button.The display returns to the normal screen.VIDEO LOSS SET settingUse the jog dial to move the cursor to VIDEO LOSS, and thenturn the shuttle dial clockwise.“FREEZE” flashes. If the camera images are lost when this setting isactive, “VIDEO LOSS !” appears on the screen and the images arepaused.Display examples:• OFF: When a video loss occurs, a blank screen is displayed.• FREEZE: When a video loss occurs, the image that was beingdisplayed immediately before it occurred is displayed.• TEST: When a video loss occurs, the test pattern is displayed.Color level settings1 Use the jog dial to move the cursor to COLOR LEVEL, andthen turn the shuttle dial clockwise.“AUTO” will flash.2 Use the jog dial to select a setting (example: AUTO), and thenturn the shuttle dial clockwise.Display examples:• AUTO: The color level is adjusted automatically.• 1 – 10: The color level can be adjusted manually in 10 steps.B BUZZER SET settingThe buzzer can be made to sound as a warning during an alarm andwhen the hard disk becomes full.1 Press the MENU button to select GENERAL SET, and thenturn the shuttle dial clockwise.The GENERAL SET sub-menu appears, and the cursor ispositioned at DISPLAY SET.2 Use the jog dial to move the cursor to BUZZER SET, and thenturn the shuttle dial clockwise.The BUZZER SET sub-menu appears, and the cursor moves toALARM.3 Turn the shuttle dial clockwise.“OFF” flashes. Use the jog dial to change the setting to “ON” or“OFF”.• ON: The buzzer will sound when an alarm is triggered.4 If necessary, follow the same procedure to change the buzzersetting (ON/OFF).• DISK FULL (ON): Sets whether the buzzer sounds when diskoverwriting is off and the hard disk is nearly full.• DISK ERROR (ON): Sets whether the buzzer sounds whenthere is a hard disk error.• LOCK WARNING (ON): When the security lock is engagedand a locked button is pressed, the buzzer sounds.Note: When an item is set to “ON”, the buzzer sounds twice atan interval of about 0.5 seconds.• KEY IN (ON): Sets the buzzer to sound each time an operatingbutton is pressed.• NON REC (ON): Sets the buzzer to sound when recordingstops by itself and when another person deliberately stopsrecording.CAMERA NO.03 H-------03 CAMERA NO.03 HALL-1F-03CAMERA NO.03 H-------03 CAMERA NO.03 HALL-1F-03EXIT/OSDMENU SET>ALARM : ONDISK FULL : ONDISK ERROR : ONLOCK WARNING : ONKEY IN : OFFNON REC : OFF72 English