|
RECORDING SETTING OPERATION SET>MAIN MON. DISPLAY : FULLALARM PRIORITY : LASTMON.2 DISPLAY : OFFRETRIGGER : OFFMOTION SENSOR ->ALARM DURATION SET -> REC MODE SET>PICTURE QUALITY : ENHANCEDAUDIO RECORDING : OFFALARM RECORDING : OFFALARM INTERLEAVE : ONLYPROGRAM GROUP : OFFREC RATE: @ 25FPS, DURATION: 5SECPRE-ALARM RECORDING : ¤¤¤REC RATE: **** FPS, DURATION: ***=> (07733 ALARMS CAN BE RECORDED )ALARM TRIGGER : ALARM SET>WEEK START STOP PROGRAM FPS SETSUN --:-- --:-- OFF 25FPS OFFMON --:-- --:-- OFF 25FPS OFFTHE --:-- --:-- OFF 25FPS OFFWED --:-- --:-- OFF 25FPS OFFTHU --:-- --:-- OFF 25FPS OFFFRI --:-- --:-- OFF 25FPS OFFSAT --:-- --:-- OFF 25FPS OFFDLY --:-- --:-- OFF 25FPS OFF REC SET>P-1SELECT INDIVIDUAL CAMERA RATE(FPS)01:0.313 02:0.313 03:0.313 04:0.31305:0.313 06:0.313 07:0.313 08:0.31309:0.313 10:0.313 11:0.313 12:0.31313:0.313 14:0.313 15:0.313 16:0.313NORMAL REC: 23HALARM REC : 01360 REC MODE SET>PICTURE QUALITY : ENHANCEDAUDIO RECORDING : OFFREC RATE : 25FPS ( 18H)REC RPOGRAM GROUP : OFF CONDITIONS SET>DIGITAL SERIES RECORDING : OFFTOTAL NUMBER : 1NORMAL RECORDING AREAOVERWRITE : OFFALARM RECORDING AREAOVERWRITE : OFFREMAINING DISK WARNING : 1 % AREA SET>TOTAL CAPACITY : 80GBNORMAL RECORDING AREA : 80 %AREA FULL RESET ->ALARM RECORDING AREA : 19 %AREA FULL RESET ->ARCHIVE AREA : 1 %AREA FULL RESET ->CAUTION : WHEN THE AREA SETTING IS CHANGED,THE WHOLE AREA WILL BE INITIALIZED ! MENU>1.INITIAL SET ->2.RECORD SET ->3.GENERAL SET ->4.SCREEN SET ->5.POWER FAILURE/USED TIME ->6.COPY MENU SETTINGS ->MOVE LINES WITH JOG, SELECT WITH SHUTTLE SET>1.RECORDING AREA SET ->2.RECORDING CONDITIONS SET ->3.NORMAL REC MODE SET ->4.PROGRAM REC SET ->5.TIMER SET ->6.ALARM REC MODE SET ->7.ALARM OPERATION SET ->MOVE LINES WITH JOG, SELECT WITH SHUTTLEChanges the alarm settings for detectingsuspicious people, and also changes motionsensor settings.Changes the timer settings.You must always set the timer when carryingout timer recording.Changes the program recording settings.Programs no. 1 to no. 4 can be set, andrecording can then be carried out simply byspecifying the camera for recording. Therecording period can be changed separately foreach camera.Changes the settings for connections whenmore than one (maximum of 2) digital videorecorder is connected together for seriesrecording.Changes the overwriting setting for the normalrecording area.Changes the overwriting setting for the alarmrecording area.Changes the warning settings for the remainingrecording area.Changes the recording cycle (recording speed)settings.Values in brackets are available recordingtimes.Changes the image quality settings.Specifies the program numbers for programrecording.Changes the audio recording settings.Changes the settings for alarm recording andpre-alarm recording.Main manuNormalrecordingareaDisplays the totalcapacity of the harddisk.Sets the capacity of thenormal recording area.Sets the capacity of thealarm recording area.ArchiverecordingareaSets the capacity of thearchive recording area.AlarmrecordingareaRECORDING AREA SETmenuARECORDINGCONDITIONS SET menuBNORMAL REC MODE SETmenuCPROGRAM REC SETmenuDTIMER SET menuEALARM REC MODE SET menuFALARM OPERATION SET menuG50 English
|
