Sanyo DSR-3016P Instruction Manual

Also see for DSR-3009P: Manual Manual for remote operation

Contents

Sanyo DSR-3016P Instruction Manual Manual pdf 23 page image

RECORDING IMAGES IN THE ALARMRECORDING AREAAlarm recording1 1 Setting the timePress the MENU button to display the LANGUAGE/CLOCK SETmenu, and set the date and time. After the setting has been made,press the EXIT/OSD button, the date and time appear in theoperating display. (See page 44.)2 Set alarm recording.• Press the MENU button to display the ALARM REC MODESET menu in the menu screen. Then change the ALARMRECORDING setting to the desired alarm recording setting(ENABLED, AL-REC ON TIMER, AL-REC OFF TIMER or OLYAL-RC ON TMR) and change the ALARM TRIGGER setting.(See page 59.)• Press the EXIT/OSD button to return to the normal screen.2 Suspicious person detectionWhen an alarm occurs, “ALARM” appears in the operating display,the ALARM indicator flashes and alarm recording (REC symbol)starts. Alarm images are recorded in the alarm recording area.Furthermore, the number of alarms in the operating display isincreased by one each time an alarm occurs.Note: Normal recording and timer recording stop when an alarmoccurs during normal recording or timer recording.3 Ending alarm recordingAfter the end of the alarm duration period (default setting: 5 sec),the “REC” and “ALARM” displays stop flashing and recordingstops.ENGLISH SET>01-01-2002 TUE 00:00:00 TIME SET>MODE : USEWEEK MONTH TIMEON LST-SUN 03 02:00OFF LST-SUN 10 02:00 SET>ADJUST.TIME 01:00MENU REC MODE SET>PICTURE QUALITY : SUPER FINEAUDIO RECORDING : ONALARM RECORDING : ENABLEDALARM INTERLEAVE : ONLYPROGRAM GROUP : OFFREC RATE: @ 0.1FPS, DURATION: 40SECPRE-ALARM RECORDING : ONREC RATE:@ *** FPS, DURATION: ***=> (01010 ALARMS CAN BE RECORDED )ALARM TRIGGER : ALARMThe number ofalarms is counted.ALARM01REC ALARM 0001 REPEAT EN 10-05-02 18:10:25Alarm images arerecorded22 English