Sanyo DSR-3016P Instruction Manual

Also see for DSR-3009P: Manual Manual for remote operation

Contents

Sanyo DSR-3016P Instruction Manual Manual pdf 52 page image

RECORDING SETTINGA RECORDING AREA SET menuThis describe how to make the various settings for each recordingarea.TOTAL CAPACITY displayThis shows the total recording capacity of the hard disk. This displaycannot be changed except when the hard disk capacity itself ischanged.With the initial hard disk setting, the normal recording area takes up80%, the alarm recording area takes up 19% and the archive areatakes up 1% of the disk capacity. The upper limit is 10 GB (12.5% oftotal capacity when using an 80-GB hard disk 6% of total capacitywhen using an 160-GB hard disk), so you cannot set a value greaterthan this.The assignment of space to each recording area is displayed as apercentage of the total. The normal recording area and alarmrecording area together can be set to a maximum of 99% of the totalspace.The archive area cannot be set manually. It is forcibly assigned to aminimum of 1%. Accordingly, if the normal recording area and thealarm recording area are set to a total of 85%, the archive area will beautomatically set to 15%.For example, if the normal recording area is set to 0% and the alarmrecording area is set to 99%, normal recording images will not besaved onto the hard disk. Only alarm recording images will be saved.The recording capacity for each recording area should be assignedaccording to the requirements of the particular recording location.If an additional hard disk is added, the increased capacity will beincluded in the TOTAL CAPACITY display.Note:• If you change the assignment of space to each recording area ofthe hard disk while recording is in progress, the images whichhave been recorded up until that point will be erased. This isbecause the hard disk itself is initialized during this operation, sobe very careful when making this kind of setting. If you need tochange the sizes of the recording areas for some reason, makesure that you make a backup copy of the images on some othermedium such as a computer.• When the MIRRORING of the HDD SET setting has been set to“ON”, the TOTAL CAPACITY display of RECORDING AREA SETshows a smaller value for the hard disk capacity.Resetting each recording areaExample: Set the normal recording area to 50% andthe alarm recording area to 49%1 Press the MENU button to select RECORD SET, and then turnthe shuttle dial clockwise.The RECORD SET sub-menu appears, and the cursor moves toRECORDING AREA SET.2 Use the jog dial to move the cursor to RECORDING AREASET, and then turn the shuttle dial clockwise.The RECORDING AREA SET sub-menu appears, and the cursoris positioned at NORMAL RECORDING AREA.3 Use the jog dial to move the cursor to NORMAL RECORDINGAREA, and then turn the shuttle dial clockwise.“80%” flashes.4 Use the jog dial to change the setting, for example from“80%” to “50%”, and then turn the shuttle dial clockwise.The cursor moves to ALARM RECORDING AREA.5 Turn the shuttle dial clockwise.“36%” flashes.6 Turn the jog dial to change the setting, for example from 36%to 49%, and then turn the shuttle dial clockwise.The cursor moves to AREA FULL RESET.7 Turn the shuttle dial counterclockwise.The screen changes to show a “WARNING” display. This is amessage to warn you that the hard disk is about to be reinitialized.8 To reinitialize the hard disk, turn the jog dial to display “YES”,and then turn the shuttle dial clockwise.The RECORDING AREA SET screen appears and the recordingcapacities for each area are changed.Note: If you turn the shuttle dial clockwise when “NO” is selected, theRECORDING AREA SET screen appears and the recordingcapacities return to their previous settings. The hard disk is notreinitialized in this case.MENU AREA SET>TOTAL CAPACITY : 80GBNORMAL RECORDING AREA : 80 %AREA FULL RESET ->ALARM RECORDING AREA : 19 %AREA FULL RESET ->ARCHIVE AREA : 1 %AREA FULL RESET ->CAUTION : WHEN THE AREA SETTING IS CHANGED,THE WHOLE AREA WILL BE INITIALIZED ! AREA SET>TOTAL CAPACITY : 80GBNORMAL RECORDING AREA : 50 %AREA FULL RESET ->ALARM RECORDING AREA : 49 %AREA FULL RESET ->ARCHIVE AREA : 1 %AREA FULL RESET ->THIS CHANGE WILL INITIALIZE THE DISK.ALL RECORDING WILL BE ERASED.ARE YOU SURE ?NOCHANGE WITH JOG. SET WITH SHUTTLEEnglish 51