Sanyo DSR-3016P Instruction Manual

Also see for DSR-3009P: Manual Manual for remote operation

Contents

Sanyo DSR-3016P Instruction Manual Manual pdf 72 page image

GENERAL SETTINGA DISPLAY SET menuThis sets which operation displays appear on the monitor.DISPLAY SET settingThe date and time that have been set using the CLOCK SET andother settings can be displayed on the monitor screen duringrecording and playback. The default setting is for all displays to be“ON”, so all setting items in this menu appear on the screen. You canturn the displays off if required.1 Press the MENU button to select GENERAL SET, and thenturn the shuttle dial clockwise.The GENERAL SET sub-menu appears, and the cursor ispositioned at DISPLAY SET.2 Turn the shuttle dial clockwise.The DISPLAY SET sub-menu appears, and the cursor moves toDATE.3 Turn the shuttle dial clockwise.“ON” flashes. If you use the jog dial to change it to “OFF”, the datedisplay disappears from the screen.4 Turn the shuttle dial clockwise.The cursor moves to TIME.5 Turn the shuttle dial clockwise.“ON” flashes. If you use the jog dial to change it to “OFF”, the timedisplay disappears from the screen.6 If necessary, follow the same procedure (steps 3 and 4) tochange the ON/OFF settings.• QUALITY (OFF): The picture quality mode does not appearduring recording and playback.• AUDIO (OFF): The audio recording display does not appearduring recording and playback.• ALARM COUNT (OFF): The current number of alarms doesnot appear.• ALARM TYPE (OFF): The type of alarm recording does notappear.• TITLE (OFF): The camera title does not appear.Note:• If ALARM RECORDING in the ALARM REC MODE SET menuhas been set to “OFF”, ALARM COUNT and ALARM TYPE do notappear.• When set to “ON”• ALARM appears in the operating display during alarmrecording.• PRE appears in the operating display during pre-alarmrecording.• ARCHIVE appears when playing back images in the archivearea.7 Press the EXIT/OSD button.The display returns to the normal screen.Title settingThis lets you set a title for each of the cameras, such as where thecamera is located, and have that title appear on the monitor.Example: To set a title of “HALL-1F” for camera 31 Use the jog dial to move the cursor to TITLE SET, and thenturn the shuttle dial clockwise.The normal monitoring screen will be displayed and the title settingwill appear at the center of the screen.2 Press camera select button 3.The images from camera 3 will appear on the monitor, and thecursor will be at the beginning of the title setting.MENU SET>DATE : ONTIME : ONQUALITY : ONAUDIO : ONALARM COUNT : ONALARM TYPE : ONTITLE : ON@ TITLE SET ->VIDEO LOSS : TESTCOLOR LEVEL : AUTOEXIT/OSD SET>DATE : ONTIME : ONQUALITY : ONAUDIO : ONALARM COUNT : ONALARM TYPE : ONTITLE : ON@ TITLE SET ->VIDEO LOSS : TESTCOLOR LEVEL : AUTOCAMERA NO.01 --------01CAMERA NO.01 --------01CAMERA NO.03CAMERA NO.03 ----------------0303CAMERA NO.03 --------03English 71