|
RECORDING IMAGES IN THE ALARMRECORDING AREAPre-alarm recording1 Setting the timePress the MENU button to display the LANGUAGE/CLOCK SETmenu, and set the date and time. After the setting has been made,press the EXIT/OSD button, the date and time appear in theoperating display. (See page 44.)2 Set pre-alarm recording.Press the MENU button to display the ALARM REC MODE SETmenu. Set ALARM RECORDING to the desired alarm recordingsetting (example: ENABLED). The *** setting for PRE-ALARMRECORDING will be set to “OFF”, so change it to “ON”. (See page62.)Press the EXIT/OSD button to return to the normal screen. “PRE”appears in the operating display, the ALARM indicator illuminatesand pre-alarm recording starts (the REC mark does not appear).The same monitored image as in the normal recording area isrecorded repeatedly in the alarm recording area.Recording onto the hard disk proceeds automatically (defaultsetting) according to the following settings. The settings can bechanged between long-period recording and high-quality recordingin five steps. (See page 59.)• Hard disk recording areas:Normal recording area: 80%Alarm recording area: 19%Archive area: 1%• Picture quality: EN (Enhanced)• Recording speed: 8.33 FPS (81H)3 When an alarm is received, pre-alarm recording stopsautomatically and the alarm images are recorded.The “PRE” disappears from the operating display, “ALARM”flashes and the ALARM indicator flashes.ENGLISH SET>01-01-2002 TUE 00:00:00 TIME SET>MODE : USEWEEK MONTH TIMEON LST-SUN 03 02:00OFF LST-SUN 10 02:00 SET>ADJUST.TIME 01:00MENU REC MODE SET>PICTURE QUALITY : SUPER FINEAUDIO RECORDING : ONALARM RECORDING : ENABLEDALARM INTERLEAVE : ONLYPROGRAM GROUP : OFFREC RATE: @ 0.1FPS, DURATION: 40SECPRE-ALARM RECORDING : ONREC RATE:@ *** FPS, DURATION: ***=> (01010 ALARMS CAN BE RECORDED )ALARM TRIGGER : ALARMREC/STOPALARM 01REC PRE 0000 REPEAT EN 10-05-02 18:10:25ALARM01REC ALARM 0001 REPEAT EN 10-06-02 09:30:15Pre-alarm imagesare recordedMonitored imagesare recordedEnglish 23
PreviousNext |