Sanyo DSR-3716PA Manual For Remote Operation

Also see for DSR-3706PA: Instruction manual Quick operation guide

Contents

Sanyo DSR-3716PA Manual For Remote Operation Manual pdf 17 page image

Search Recorded Images (User level: ID2/3)16 English1 Click "5. MOTION DETECTION SEARCH" inthe search menu.The MOTION DETECTION SEARCH screen displays.2 Specify a search area using "SEARCHFROM".Select the recording area targeted for the search.Selections:• ALARM (alarm recording area)• NORMAL (normal recording area)• ALARM AND NORMAL(Alarm/normal recording area)3 Specify [CHANNEL].You can specify a channel to narrow the search range.Select "--" when a channel is not specified.4 Specify an image range to search.The start and stop date/time of the image recorded inthe DVR are displayed in [START] and [END].Change the date and time of [START] and [END] whennarrowing the search range.5 Click [SET].The first image of the search range is displayed as astill image in the PREVIEW screen.6 Set the detection points for motion.(MOTION SENSOR SET)The setting frame of the motion detection point willdisplay in the PREVIEW screen as an 8 (vertical) x 10(horizontal) square.If you click over the square, a red mark will display andbe set to a motion detection point. If you click again, thesetting will be cleared. Set a motion detection point tothe required portion while viewing the PREVIEWscreen.7 Set [MOTION SENSOR LEVEL].Set the detection sensitivity of the motion sensor.Selected value: OFF/1 (high) to 10 (low)8 Click [PREVIEW].Execute a motion detection search for images within aspecified search range.When an image with movement is detected, it willdisplay as a still image in the PREVIEW screen.9 Click PREVIEW screen.Change to main screen and playback images. You canperform normal playback operations after playbackstarts.5 MOTION DETECTION SEARCHIf a motion detection search is not performed,click the PREVIEW screen as is. Change tomain screen and playback images.65872394Message boxIncrease the set value if you want to avoiddetection of small vibrations or movements of theobject due to factors such as wind.When multiple images with movement aredetected, the detected images will display inorder from the oldest each time [PREVIEW] isclicked.Message box displayEach time search conditions are set or whenthe [SET] or [PREVIEW] buttons are clicked,the search status and results will display in amessage box over the PREVIEW screen.Display message:• SEARCHING• FOUND• IMAGES NOT FOUND!