Sanyo DSR-3716PA Manual For Remote Operation

Also see for DSR-3706PA: Instruction manual Quick operation guide

Contents

Sanyo DSR-3716PA Manual For Remote Operation Manual pdf 36 page image

English 35Screen settings and DVR information (User level: ID3)A grey pattern can be set on a specified channel used to watchlive video or play back images to protect confidentiality andprivacy.1 MASK (Initial setting: OFF)To choose mask settings.Choosing "ON" allows you to set a grey pattern on eachof the channels of the main monitor, monitor 2 andnetwork.2 TIME PERIOD (Initial setting: T-1)It allows you to set time periods.Selections: T-1, T-2, T-3, T-4The parentheses of "T-1 - T-4" show the time periods thatwere preset using TIME PERIOD SET of the DVR.3 Setting the mask portion for each monitor (Initialsetting: OFF)You can set the grey pattern for each channel of each ofthese 3 monitors.• MAIN MONITOR represents the screen of the mainmonitor connected to the DVR.• MON. 2 represents the screen of the spot monitorconnected to the DVR.• NETWORK represents the main screen of thecomputer used for network operations.Displays the information concerning power loss/used timeand firmware version information.1 POWERThe number of power failure and the four most recentpower failure records (Date and time of failure/recovery)are displayed.2 USED TIMEThe used time of each disk (DISK1 USE, DISK2 USE)and the total amount of electricity time (POWER) aredisplayed.3 FIRMWAREDisplays the firmware version of the firmware currentlymounted on the DVR.The eight most recent occurrences among the initializingand recording restart records of the DVR's hard disk aredisplayed.1 DATE/TIME: Displays the date and time of the operation.2 AREA: Displays the recording area for the operation.A MASK SETNETWORK mask settings can only be programedby ID1 users. ID2 and ID3 users can watch theimages on all channels.123(Example screen for the 16-channel model)B POWER LOSS/USED TIMEC INITIALIZATION LOGThe messages "INITIALIZED", if the computerwas initialized and "AREA RESET" if therecording area became full and recording wasrestarted, are displayed in parentheses next tothe recording area.12321