Sanyo DSR-3716PA Manual For Remote Operation

Also see for DSR-3706PA: Instruction manual Quick operation guide

Contents

Sanyo DSR-3716PA Manual For Remote Operation Manual pdf 31 page image

Recording settings (User level: ID3)30 EnglishIt allows you to set the alarm recording and the pre-alarm recording conditions.1 ALARM RECORDING (Initial setting: OFF)To set the alarm recording operation mode.Selections:OFF: No alarm recording.ENABLED:Enables alarm recording at any given point in timeregardless of timer recording.AL-REC ON TIMER:Records alarm recording only during timer controlledrecording operation.AL-REC OFF TIMER:Records alarm recording outside timer controlledrecording operations.OLY AL-REC ON TIMER:Records alarm recording only during the time slot setfor the timer controlled recording.(Even if a timer controlled recording is set, thestandby mode of the timer controlled recording is notactivated.)2 PICTURE QUALITY (Initial setting: ENHANCED)It allows you to set the quality of the image recorded bythe DVR.Selecting a high quality image will result in shortenedrecording time.Selections:BASIC (Basic image quality)NORMAL (Standard image quality)ENHANCED (Enhanced image quality)FINE (Fine image quality)SUPER FINE (Super fine image quality)3 AUDIO RECORDING (Initial setting: OFF)Audio data can be recorded at the same time as imagedata.ON: Audio recording on.OFF: Audio recording off.4 ALARM INTERLEAVE (Initial setting: ONLY)Setting the recording pattern when multiple cameras areconnected to the DVR.Selections:ONLY:Records only the images of the camera that detectedthe alarm.SW:Records the images of the camera that detected thealarm and the images of the other camerasalternately.The 6-channel model will record images as followswhen the alarm is triggered by CH1.CH1 → CH2 → CH1 → CH3 → CH1 → CH4 →CH1 → CH5 → CH1 → CH6A REC RATE (Initial setting: 12.5 FPS)To set the recording rate of the alarm recording.The letter "A" is displayed in front of the availablerecording rate when AUDIO RECORDING is set to"ON".Available settings:25, 16.67, 12.5, 8.333, 6.25, 5, 4.167, 3.571, 3.125, 2.778,2.5, 2.273, 1.923, 1.667, 1.471, 1.316, 1.19, 1.087, 1, 0.5,0.333, 0.25, 0.2, 0.1, 0.05, 0.033 (Unit: FPS)B DURATION (Initial setting: 20 SEC)It allows you to set the duration of the recording oncethe alarm has been triggered.Available settings:5, 10, 20, 40 SEC, 1, 2, 3, 4, 5, 10, 15 MIN, CCCC: Records only when an alarm is detected. One alarm willstart a recording of at least 5 seconds.F ALARM REC MODE SET4532167A BA B• Audio data is recorded in the samerecording area as the images. Therefore,recording time is shortened.• If recording audio, set the recording ratebetween "1 - 25 FPS".