Sanyo DSR-3716PA Manual For Remote Operation

Also see for DSR-3706PA: Instruction manual Quick operation guide

Contents

Sanyo DSR-3716PA Manual For Remote Operation Manual pdf 27 page image

Recording settings (User level: ID3)26 EnglishIt allows you to set HDD recording area managementconditions such as overwrite recording, remaining diskwarning level, automatic erase function, etc.1 OVERWRITE (Initial setting: ON)Setting recording conditions to overwrite for the normaland alarm recording areas.ON:When the hard disk becomes full, recording continuesand data is automatically overwritten from the firstimages.The [AREA FULL RESET] button of the normal oralarm recording area does not appear on theRECORDING AREA SET screen.OFF:The remaining capacity warning indicator of the DVRstarts blinking when the recording area becomes full,recording stops.2 REMAINING DISK WARNINGThe remaining disk warning buzzer can be programed togo off when the remaining space available reaches aspecified value if the [OVERWRITE] setting is set to"OFF" for the normal and alarm recording area.Now, setting the remaining disk warning level that will setthe warning buzzer on. The set level will apply to boththe normal and alarm recording areas.Available settings: 1 - 10%3 SERIES REC (Initial setting: OFF)Series recording can be set if the multiple DVR units areconnected using the SERIES REC terminal at the rearpanels.Series recording implies that recording can automaticallycontinue on the next DVR unit when the recording areaof the first DVR becomes full.ON: Performing series recording.OFF: Series recording is not activated.4 AUTO DELETE (Initial setting: OFF)It is the automatic erase function of the images saved inthe normal and alarm recording area. The image datathat is older than the specified storage period areautomatically erased.Selections: OFF, 1, 2, 3 ... 99 DAYS1 - 99 DAYS: To set the auto delete function andstorage period between 1 and 99 days.OFF: The images will not be erased automatically.B RECORDING CONDITIONS SETBy setting [OVERWRITE] to "ON" whenrecording for a long time and the recordingarea becomes full, the data will be overwrittenand erased sequentially from the oldestimages. Save necessary images before theyare overwritten.When the [OVERWRITE] setting of the normaland alarm recording area is set to "ON","***"is displayed, the remaining disk warning levelcannot be set.2341Series recording is only available when[OVERWRITE] is set to "OFF".• The auto delete function does not apply tothe archive area.• If you use the auto delete function, copy ordownload important data before thestorage period expires. (Refer to P18, 19)