Sanyo DSR-3716PA Manual For Remote Operation

Also see for DSR-3706PA: Instruction manual Quick operation guide

Contents

Sanyo DSR-3716PA Manual For Remote Operation Manual pdf 35 page image

General settings (User level: ID3)34 EnglishThe NETWORK SET allows you to set the network beforethe DVR is connected to it. The menu on this screenenables you to change DVR settings through the computer.1 IP ADDRESS / SUBNET MASK / GATEWAYInput values between "0 - 255"2 PORTNormally set to "80".3 PASSWORD SETTINGIt allows you to set a confirmation password according toeach user level. Type a password in each appropriate box.Choose a 4 to 8 alphanumeric character password.4 NETWORK SPEED (Initial setting: NO LIMIT)It allows you to set the network transmission speed.Available settings:NO LIMIT, 64, 128, 256, 512, 1024KbpsDisplays the interface information set through the DVRwhen using the system controller operations.1 DATA SPEED (Unit: bps)Shows the data transmission speed.2 STATUS INFODisplays the state of the transmission of the statusinformation.3 ALARM INFODisplays the state of the transmission of the alarminformation.4 ADDRESSShows the set address.D NETWORK SETAfter changing the network settings, switch to the DVRoperations. Reconnect the DVR with the network.To choose a PORT setting other than the preset "80"add ": (colon)" after the IP address and the PORTnumber.http://192.168.0.1:81/User level ID1 ID2 ID3User name ID1 ID2 ID3Operations allowedLive video monitoring m m mPlayback m mCamera control m mRecording mDVR settings mPassword (initial setting) 1111 2222 3333Restarting or resetting the DVR will restoreinitial setting (NO LIMIT).2341E RS-485 SET1234