Sanyo DSR-M814 Instruction Manual

Also see for DSR-M814: Service manual addendum Service manual

Contents

12OPERATIONOPERATION1. ADJUSTING THE DISPLAYAt power ON, the operation display area appears at the topof the monitor screen.The operation display area shows thedate/time, image quality, remaining time, and otherinformation needed for operations.Example: Normal screen(1) Operation symbol displayDisplays symbols for recording, playback, playbackspeed, etc.For the meaning of each operation symbol, see“Displayed symbols” on the right.During simultaneous recording and playback, the displayindicates playback ( ).(2) Picture quality display (JP.44)Displays the quality of the image that can be recordedon the hard disk. Set to “HIGH” in the default settings.(3) Audio recordingDisplays “A” when audio recording has been set.(4) Remaining time displayUnless “OVER WRITE” is set for recording, displaysthe remaining amount of available recording time, asshown below.(5) Date display (JP.34)Shows the month/day/year.05-10-04 (month/day/year)(6) Time display (JP.34)“PLEASE SET THE CLOCK” is displayed when youturn the power ON for the first time. The digital videorecorder uses the date and time to manage recordingand playback points.(7) Alarm display and alarm count display (JP.17)When you set an alarm using the MODE SET> menu item, the alarm display areadisplays the following information. (JP.46)z Alarm displayWhen alarm recording is set, “AL” appears.During alarm recording, the “AL” display flashes.z Alarm count displayDisplays the total number of alarms that have beengenerated.(8) Camera title and VIDEO LOSS displayThe title set for each camera is displayed.“VIDEO LOSS” is displayed when there is no videoinput.Operation display areaRemainingtimeDisplayedincrement Example1 hour or more 1 hourincrements 1HLess than 1hour10 minuteincrements 10MLess than 10minutes1 minuteincrements 1M(1)(5) (6)(2) (3) (4)(7)(8)Operationdisplay area X 1 8 0 H I A0 5 - 1 0 - 0 4 0 8 : 3 0 : 3 5 A L 0 0 0 1 5e00_VDH_M814.book Page 12 Thursday, October 28, 2004 9:59 AM