|
46RECORDER MENUSETTINGSSettings ( indicates default setting.)* CC: Operates while alarm is active. (Operates for more than 5 seconds per alarm.)Alarm recording settings1 Press the [MENU] button.The [MENU] button lights, and the screen is displayed.2 Select “3. RECORDER MENU”, andpress the [ ] button.The screen is displayed.[ ] button[MENU] button [ ] button[ ] button [EXIT/OSD] button3 Press the [ ] or [ ] button to select“2. ALARM REC MODE SET”, thenpress the [ ] button.The screen isdisplayed.(continued)(1)(3)(4)(2)Item Setting Description(1) ALARM MODE OFF Does not perform alarm recording.ENABLED Always performs alarm recording, whether or not timer recording is being performed.AL-REC ON TIMER Performs alarm recording only during timer recording.AL-REC OFF TIMER Performs alarm recording only when timer recording is not being performed.OLY AL-RC ON TMR Performs alarm recording only for the amount of time set by the timer.Does not return to timer recording standby.(2) ALARM DURATION Time selections*: CC/5SEC/10SEC/20SEC()/40SEC/1MIN/2MIN/3MIN/4MIN/5MIN/10MIN/15MINSets the amount of time for recording when a single alarm is generated.(3) ALARM TRIGGERSelects how to detect intruders. ALARM Performs alarm recording when an external alarm is generated (when a switch is attached tothe alarm input terminal on the rear panel, and the switch is activated).SENSOR Performs alarm recording when the motion sensor detects movement. See the information onsetting the motion sensor. (JP.41)ALARM OR SENSOR Performs alarm recording when either the external alarm or motion sensor is activated.ALARM AND SENSOR Performs alarm recording when both the external alarm and motion sensor are activatedsimultaneously.(4) VIDEO LOSS ON Displays “VIDEO LOSS” on the screen when the camera image is interrupted.Also outputs the WARNING signal to a rear panel terminal.OFF Doesn’t display “VIDEO LOSS” on the screen when the camera image is interrupted.e00_VDH_M814.book Page 46 Thursday, October 28, 2004 9:59 AM PreviousNext |