Sanyo DSR-M814 Instruction Manual

Also see for DSR-M814: Service manual addendum Service manual

Contents

RS-485/NETWORK SET61SETTINGSConnect the digital video recorder’s RS-485 (A, B) controlterminals to the system controller, hard disk digital recorderor similar device.Settings ( indicates default setting.)RS-485 connections and settings1 Press the [MENU] button.The [MENU] button lights, and the

screen is displayed.2 Select “7. RS-485/NETWORK SET”, andpress the [ ] button.The screen is displayed.1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19RS-485ARS-485BC[ ] button[MENU] button [ ] button[ ] button [EXIT/OSD] button(1)(2)(3)(4)Item Setting Description(1) DATASPEED240048009600 19200Used to select thecommunication speed.(Unit: bps)(2) STATUSINFOON Enables status information to besent on the RS-485 line. OFF Not set(3) ALARMINFOON Enables alarm information to besent on the RS-485 line. OFF Not set(4) ADDRESS 000 to 127(001)When connecting multiplerecorders, different addressnumbers are set for each.3 Press the [ ] and [ ] buttons to selectthe desired item, then press the [ ]button.4 Press the [ ] and [ ] buttons tochange the setting, then press the [ ]button.5 Repeat steps 3 to 4 to set the otheritems as needed.6 When you have finished making thesettings, press the [EXIT/OSD] button.The display returns to the normal screen.e00_VDH_M814.book Page 61 Thursday, October 28, 2004 9:59 AM