Sanyo DSR-M814 Instruction Manual

Also see for DSR-M814: Service manual addendum Service manual

Contents

MENU CONFIGURATION31SETTINGSFollow the steps below to restore the settings in thedisplayed setting screen to the default settings. Only thedisplayed settings are restored.The following screens are setting screens displayed byselecting items from the

screen.Each time you press the [MENU] button, each of thescreens shown on this page is displayed in the ordershown.1. LANGUAGE/CLOCK SET (JP.33)Enables the followingsettings:z Screen displaylanguagez Digital video recorder’sdate and time settingsz Daylight Saving timesettingsz Time synchronizationwith external devices2. SCREEN SET MENU (JP.38)Lets you make thefollowing screen-relatedsettings:z Screen display methodz Camera titlesz Motion sensor fordetecting movingsubjects3. RECORDER MENU (JP.43)Lets you make variousrecording settings, andinitialize the hard disk.4. DISPLAY SET (JP.53)Lets you display or hideinformation items in theoperation display area.5. BUZZER SET (JP.54)Lets you enable or disableaudible alarms for variousevents.6. SECURITY LOCK SET (JP.55)Lets you set passwords toprevent unauthorizedusers from operating thedigital video recorder.7. RS-485/NETWORK SET (JP.59)Used to make the settingsneeded when connectingthe digital video recorderto an external device byRS-485 interface, or to aPC via a network (LAN).Restoring items to the defaultsettings1 Display the setting screen you want torestore.2 Press the [MENU RESET] button.The displayed settings are restored to the defaultsettings.Overview of settings[MENU RESET] buttone00_VDH_M814.book Page 31 Thursday, October 28, 2004 9:59 AM