Sanyo DSR-M814 Instruction Manual

Also see for DSR-M814: Service manual addendum Service manual

Contents

SCREEN SET MENU41SETTINGSBy setting the motion sensor on the screen, any movementby the subject will automatically activate alarm recording.You can set the following items:z Motion detection position on screenz Number of camera for which to set motion sensorz Motion sensor sensitivity (Default setting is OFF.)9 When you have finished making thesettings, press the [EXIT/OSD] button.The display returns to the normal screen.The screen displays the set camera title.Setting the motion sensor1 Press the [MENU] button.The [MENU] button lights, and the

screen is displayed.2 Select “2. SCREEN SET MENU”, andpress the [ ] button.The screen is displayed.FLOOR 1 2Set camera titleH I A0 5 - 1 0 - 0 4 0 8 : 3 0 : 35AL 0 0 0 1 5[ ] button[MENU] button[ ] button[ ] button [EXIT/OSD] button[CHANNEL]buttons[ ] button3 Select “3. MOTION SENSOR SET”, andpress the [ ] button.The motion sensor setting screen for CAMERA NO.1 appears.4 Press the desired [CHANNEL] button toselect the desired camera number.5 Press the [ ] or [ ] button to select“LEVEL,” then press the [ ] or [ ]button to set the sensitivity.The level can be set to a value between 1 and 10.The lower the value, the higher the sensitivity.(Default setting: OFF)A confirmation tone sounds when making sensorsettings.DisplayscurrentcameranumberH I A0 5 - 1 0 - 0 4 0 8 : 3 0 : 3 5 A L 0 0 0 1 5e00_VDH_M814.book Page 41 Thursday, October 28, 2004 9:59 AM