Sanyo LCD-32K40TD Instruction Manual

13Remove the battery com-partment cover .Insert two size AAA batteries (1.5V)according to "+" and "-" polarity markingsinside the battery compartment.Close the battery com-partment cover.1 23BEFORE OPERATIONPoint Remote Control toward LCD TV (InfraredRemote Receiver) whenever pressing thebuttons. Maximum operating range for RemoteControl is about 16.4’ (5m) in front, about 30° tothe left or the right, about 15° for up or down.To insure safe operation, please observe the following precautions:● Use (2) AAA, alkaline batteries.● Replace two batteries at the same time.● Do not use a new battery with a used battery.● Avoid contacting with water or liquid.● Do not expose the Remote Control to moisture, or heat.● Do not drop the Remote Control.● If a battery has leaked on the Remote Control, carefully wipe case cleanand install new batteries.● Risk of explosion if battery is replaced by an incorrect type.● Dispose of used batteries according to the instructions.● Do not expose batteries (battery pack or batteries installed) to excessiveheat such as sunshine, fire or the like.REMOTE CONTROL BATTERIES INSTALLATIONOPERATION RANGEInfrared Remote Receiver30 3015 155m