Sanyo LCD-32K40TD Instruction Manual

42DEALER MODEThe Dealer Mode has 11 different modes: VOLUME LOCK,TUNING LOCK, START MODE, OSD, RC, AC POWER, MUSICMODE, NO SIGNAL OFF, PC CONTROL, BAUD RATE andRESET.TO DISPLAY DEALER MODE:Press and hold Menu button on Side Control, and then pressINFO button on remote control to display Dealer mode menu.DEALER MODEPress ▲, ▼, ◄ or ► button to navigate through the optionsand adjust the options.Press and hold Menu button on Side Control, and pressINFO button on remote control to display Dealer modemenu.Press menu button to exit menu operation.123Option DescriptionVOLUME LOCK To limit the maximal volume. It's necessary to set up the maximumvolume before VOLUME LOCK ON.The way to prevent user from executing the Tuning function.TUNING LOCKThe LCD TV will automatically enter to the setting mode while beingturned on. You can select OFF, DTV, ATV, AV1(AV1-S), AV2(AV2-DVD),HDMI-1, HDMI-2, HDMI-3, PC in START MODE. When it is set "OFF", itwill keep the mode before being turning off.START MODEWhen it is set OFF, corresponding OSD cannot display on the screenwhile operating.OSDYou can set "NORMAL", "PROHIBIT" or "SEPARATE" in RC MODE.Use this feature to set Remote Control mode including Power ON/OFFfunction.NORMAL● Set Remote Control to normal function.PROHIBIT● When RC is disabled, only Side-panel button can be used.SEPARATE● POWER button still can be functioned to Power ON/OFF.● FAV ▼ button to Power OFF in all modes including Teletext mode.● FAV ▲ button to Power ON in all mode including Teletext mode.RCAC POWER MODE You can set "STAND", "LAST" or "ON" in AC POWER MODE.Use this feature to set TV condition when AC power cord is plug-in.ON● When AC power cord is plug-in, LCD TV is always ON.STANDBY● When AC power cord is plug-in, LCD TV is always STAND-BY.LAST● When AC power cord is plug-in, the LCD TV will be operateddepending on last TV condition. (ON or Stand-by)9600bpsSTANDBY