Sanyo LCD-32K40TD Instruction Manual

37SETUP MENUAUTO UPDATE TIMEWithin SETUP menu, press ▲ or ▼ to scroll through the pageupward or downward until you select the Auto Update Time.21Press ► button or OK button to display the right picture. Press ▲or ▼ button to select Hour or Minute item, press ◄ or ► button toadjust the value. After setting, press ▲ or ▼ button to select Closeand press OK button to confirm the setting.3 After setting, press ▲ or ▼ button to select Close and press OKbutton to confirm the setting.Note:● This item will be in grey and cannot be selected if Auto Update is setOff.● The default setting of Auto Update Time is 04:00.● For convenience of watching TV, Auto Update Time can be set theinterval that LCD TV is not be used.AUTO UPDATEWithin SETUP menu, press ▲ or ▼ to scroll through the pageupward or downward until you select Auto Update, shown asPicture 1. Then press ◄ or ► button to select On or OFF.On: To allow system update automatically.Off: To turn off Auto Update function.Note:● You should first set this item to On before performing systemupdate function.● The LCD TV will be updated automatically according to thepreset time. If you are watching TV, and the preset time iscoming, the screen will be displayed as Picture 2.Press ◄ or ► button to select NO, then press OK button orwait for a minute, it will be come back the present status.Press ◄ or ► button to select YES, then press OK button orwait for a minute, the system will update automatically. And thedetails, please refer to "MANUAL UPDATE" on page 36.● The LCD TV also will be auto updated according to the presettime in standby status. The Power indicator will be turned bluefrom red during the processing and the screen will black out. Ifpress POWER button on Remote Control, it will stop updating.MODEL INFORMATIONWithin SETUP menu, press ▲ or ▼ to scroll through the pageupward or downward until you select the Model Information.21Press ► button or OK button to enter Model Information menu.The information of Model Name, Hardware Model, HardwareVersion, Software Model and Software Version, shown as rightpicture.Auto UpdateAuto Update Time 04 : 00Manual UpdateSETUPMENUBACK OKModel InformationNote:● All items in Model Information menu can not be set.Picture 1Picture 2