Sanyo LCD-32K40TD Instruction Manual

38SETUP MENUMANUAL UPDATEWithin SETUP menu, press ▲ or ▼ to scroll through the pageupward or downward until you select the Manual Update.21Press ► button or OK button to display Picture 1. Press ◄ or► button to select Yes, the system will enter the following stepsautomatically:Step 1: Searching for update of software, shown as picture 2.Step 2: Downloading the software, shown as picture 3.Picture 1Picture 2Picture 3Picture 4Picture 5Note:● If no information has been searched, the message of "NOUpdate of software. The TV will reboot. Please wait." will bedisplayed on the screen.● Press BACK button in the proceeding, it will stop searching.And the message of "Searching for update has beencancelled. The TV will reboot. Please wait." will be displayedon the screen.● Only BACK button is active during the processing.Note:● Due downloading time is over 35 minutes or the receiving datahas some mistake. The message "Software downloading hasbeen FAILED. The TV will reboot. Please wait." will bedisplayed on the screen.● Press BACK button in the proceeding, it will stop downloading.The message "Software downloading has been cancelld.The TV will reboot. Please wait." will be displayed on thescreen.● Only BACK button is active during the processing.Step 3: Updating the software, shown as picture 4.Note:● Please do not shut off AC power during the processing.● No button could be active during the processing.Step 4: Completed to update the software, shown as picture 5.Picture 6Note:● If software updating has been failed, the display of the screenwill be like as Picture 6.