25TV SETTINGAuto Channel Search is performed automatically when TV is first powered on or after resetting.Note: Be sure to select the proper input source (ATV/DTV) before tuning operation.AUTO TUNINGYou should perform an auto channel search to search for all channels available and store them in memory.Press ◄ or ► button to select TV SETTING menu. Press▼ button to access the menu. Auto Tuning item will behighlighted, and press ► or OK button to access.21 Press MENU button and the main menu screen will bedisplayed.Now a confirmation box appears on the screen as Picture1. Press ◄ or ► button to select Yes, and then press OKbutton to start Auto Tuning. ATV search firstly, then DTVand Radio, shown as Picture 2.3During tuning, press Back button to skip the current tuningand start another one. Or press MENU button to exit thetuning. As Pictures 3 and 4 shown, you can press ◄ or ►button to select Yes and then press OK button to accessthe operation.4Picture 1Picture 2Picture 3Picture 4Picture 5After Auto Tuning, the LCD TV will memorize all ATV/DTVchannels available. The Saving display will be shown onthe screen like Picture 5 for 5 seconds. And then the firstposition in the programme list will be on.5Picture 6Note:● At the first power on and just after plug and play channelset-up, operating mode selection menu will appear, shownas picture 6. Press ◄ or ► button to select and press OKbutton for Standard/Energy Save or Store/Dynamic.Then the pop up menu disappears.● Recommending Standard/Energy Save mode for normalhome viewing.● The password for Block Programme will be cleared afterauto tuning.