Sanyo LCD-32K40TD Instruction Manual

34TIME MENUON TIMER SETUPPress ▲ or ▼ button to select On Timer item, press ► or OKbutton to access the submenu.21 Navigate to the Time menu, press ▼ button to access.Now the Active item will be highlighted automatically, shownas right picture. Press ◄ or ► button to select Off, Once,Everyday, Mon-Fri, Mon-Sat, Sat-Sun or Sun.3When finished, use ▲ or ▼ button to select Close and press OK button to confirm the setting.6With On Timer has been set, the LCD TV will automatically turn on atthe preset time.Note:● While AC Power off, the setting will be removed, except for DTV mode.● While On Timer is set, the Timer indicator will be light in Stand-by status.● On Timer setting will be removed while AC Power off.● If Off Timer and On Timer are set as the same time, the Off Timer setting is availabe while the LCD TV isOn, and On Timer setting is available when the LCD TV is off.● After On Timer is executed, if no operation in 2 hours, the LCD TV will be off automatically.Option DescriptionVolume Sets desired voume for the On programme.Selects one source to be viewed through On timer.ModeSelects a broadcasting program for On timer.ProgramPress ▲ or ▼ button to select Hour or Minute item, press ◄or ► button to adjust the value.4After setting On Timer, you can press ▲, ▼, ◄ or ► buttonto navigate through the following three options and adjust theoptions.5Press POWER ON/OFF button to swith the LCD TV to standby mode. At the preset time, the LCD TVwill automatically turn on and broadcast the preset program at the preset volume.7