Sanyo LCD-40XZ10F Instruction Manual

Also see for LCD-40XZ10F: Service manual

Basic Operations (Continued)15With the power on, press the Power button on the remote control to turn off the unit, and put the unit in standby mode. Tocut off the power completely, press the Power Switch directly.Turning OnTurning OffTurning On/Off the PowerInstallation GuideExitExitLanguage EnglishStartOKAuto TuningCountry Selection New ZealandCancelStartFirst Time Setup13Make sure that:The first time you use the TV, you need to set up the TV.! You have installed the batteries in the remote control.! You have connected the TV to an antenna or cable TV outlet.! You have connected the power cord.2 Press POWER to turn on the TV. After a few secondsthe Energy Save Mode screen opens.5 Installation GuideExitExitLanguage EnglishStartOKAuto TuningInstallation GuideExitExitStartOKAuto TuningLanguage English6 Now a pop-up screen opens. Press 3or4to select a propercountry according to your local area, and then press 6or OKto highlight Start item, and press OK to begin the autochannel search.NavigateTo use this TV for displaying in a store, please select [Store/Dynamic].[Standard/Energy Save] mode is recommended for normal home use.Energy Save ModeStore/DynamicStandard/Energy SaveConfirmOKPress 3or4to select Standard/Energy Save orStore/Dynamic. Press OK to confirm the selection.4 Now the Installation Guide screen will display.Highlight Language item, press 3or4to select adesired OSD language.Insert the power cord into the wall outlet. Press the Power Switch on the unit to power on.If the unit is in standby mode, press Power button on the unit or the remote control to turn on the unit, and you will be readyto use its features.Press 5or6to select Auto Tuning item, and press 4or OKto access.