Sanyo LCD-40XZ10F Instruction Manual

Also see for LCD-40XZ10F: Service manual

<Use the remote control by pointing it towards the remote sensor window of theset. Objects between the remote control and sensor window may prevent properoperation.Cautions regarding use of remote control<Do not expose the remote control to shock. In addition, do not expose the remotecontrol to liquids, and do not place in an area with high humidity.<Do not install or place the remote control under direct sunlight. The heat may cause deformationof the unit.<The remote control may not work properly if the remote sensor window of the main unit is under direct sunlight or stronglighting. In such a case, change the angle of the lighting or the TV set, or operate the remote control closer to the remotesensor window.If the remote control fails to operate the TV functions, replace the batteries in the remote control.Precaution on battery useImproper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.<Place batteries with their terminals corresponding to the (+) and (–) indications.<Different types of batteries have different characteristics. Do not mix batteries of different types.<Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause oldbatteries to leak chemicals.<Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a rash. If chemicalleakage is found, wipe with a cloth.<If the remote control is not used for an extended period of time, remove the batteries from the remote control.<The batteries (battery pack of batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.Open the battery cover.1<(Place the batteries with their terminals corresponding to the (+)and (–) indications in the battery compartment.)Insert two size-AAA batteries.2Replace the cover.3PreparationsUsing the Remote ControlInstalling the Batteries430305m