Sanyo LCD-40XZ10F Instruction Manual

Also see for LCD-40XZ10F: Service manual

1Highlight Storage To item, press 3or4button to select a channelposition in which you want to store.In Channel menu, press 6or5to select ATV Manual Tuningitem, then press4or OK to access.2If desired analog programs cannot be searched by Auto Tuning, you canmake use of ATV Manual Tuning to search programs manually.Use 6or5to select Search item, press 3or4to begin the manualATV channel search.Press 4, the unit searches towards higher frequency;Press 3, the unit searches towards lower frequency.3Manual Searching for ATV programsPicture Sound Time Setup Lock ChannelSelect Move Menu ReturnProgramme EditAuto TuningDTV Manual TuningATV Manual TuningThe search stops when a program is found and this program will bestored in current channel, then press the RED button to save.During the process, If you want to stop the search , please pressEXIT button.Manual Fine TuningFine Tuning is not necessary under normal conditions. However, in area ofinferior broadcast conditions where adjustment is necessary for a betterpicture and sound effect, use Fine Tune.Navigate to ATV Manual Tuning submenu, highlight CurrentCH item, press 3or4to select a channel you want to perform finetune.1Press 6or5to select Fine-Tune item, and then use 3or4button to fine tune until the best possible picture and sound areobtained.2During the process, press EXIT to exit, and RED button to save theeffect.3Note=Fine Tune is only for analog TV program.Memorizing the Channels (Continued)184ATV Manual TuningStorage To 1SelectColour SystemAudio SystemCurrent CHSearchFine-TuneFrequencySAVEExit1BG445.25 MHzPALATV Manual TuningFine-TuneStorage To 1SelectColour SystemAudio SystemCurrent CHSearchFrequencySAVEExit1BG445.25 MHzPALSetting Audio SystemNavigate to ATV Manual Tuning submenu, press 5or6tohighlight the Audio System item.12Press MENU to return to previous menu. Press EXIT to exit themenu screen directly.3ATV Manual TuningFine-TuneStorage To 1SelectColour SystemAudio SystemCurrent CHSearchFrequencySAVEExit1BG445.25 MHzPALNormally it is unnecessary to set audio system. However, if abnormalsound occurs, you may try to adjust the audio system.Press 3or4to select the proper audio system. Press RED buttonto save.