Sanyo LCD-40XZ10F Instruction Manual

Also see for LCD-40XZ10F: Service manual

5Insert the AC plug into a conveniently located AC outlet.=This product should be operated only from the type of power source indicated on the marking label.=Always unplug the AC cord from power outlet when not using for a long period of time.75-ohm coaxial cable (round cable)INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picturescreen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.Optimum reception of colour requires a good signal and will generally mean that an outdoor antenna must be used.The exact type and position of the antenna will depend upon your particular area.=It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio waveconditions.=The antenna cable should not be bundled with the power cord.TV REARRFAntenna ConnectionPower ConnectionNoteNotePreparations (continued)