Sanyo LCD-40XZ10F Instruction Manual

Also see for LCD-40XZ10F: Service manual

Basic Operations (Continued)16Displaying the Information BannerPress the INFO button to display the information banner. The information banner displays current status information such asthe channel number and signal source.Depending on the mode, different information is displayed. In DTV mode, more information will be displayed. Below is anexample banner in DTV mode.=The above OSD is only served as an example, and it is in DTV mode.=Information banner content varies, depending on the broadcaster and your settings.In DTV mode, the information banner may contain:! Channel number and name.! Current time.! Current program name, start and end play times.! Next program name and start and end play times.! TV or Radio.! Audio mode, audio track.! Signal strength for current channel.! Signal resolution.! Subtitle, teletext.Selecting the Input Signal SourceNote2 ABC TV SydneyMPEG SDDTV11:08British Isles: A Natural HistoryReserved for future useFri, Feb 27 2008 11:05NZDT 12:00NZDTSubtitle English Teletext 576iAlan Titchmarsh continues his epic journey around the British Islesand discovers why they are so diverse.NextFreezing the PicturePress the FREEZE button to freeze the image on the screen (the video sources still run). Press it again to reactivate the image.=If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible.Therefore do not freeze the picture for a long time.=In some mode, the FREEZE function can not work.Note123Press SOURCE button.Press 3,4or OK to confirm the selection.Press 6or 5to select the input source. Options include:SelectMoveDTVAV1AV2D-SUBHDMI1HDMI2Input SourceATVS-VideoComponent1Component2HDMI3! DTV — Watch the DTV signal.! ATV — Watch the ATV signal.! AV1 — Watch the signal from the AV1 input terminals.! AV2 — Watch the signal from the AV2 input terminals.! S-Video — Watch the signal from the S-VIDEO input jack.! Component1 — Watch the signal from the COMPONENT1 input terminals.! Component2 — Watch the signal from the COMPONENT2 input terminals.! D-SUB — Watch the signal from the D-SUB input jack.! HDMI1 — Watch the signal from the HDMI1 input jack.! HDMI2 — Watch the signal from the HDMI2 input jack.! HDMI3 — Watch the signal from the HDMI3 input jack.