Sanyo LCD-40XZ10F Instruction Manual

Also see for LCD-40XZ10F: Service manual

Customizing the Picture13Press MENU and the main menu screen displays.Within the menu, press 5or 6to scroll through the page upward or downward,and press 5,6,3,4to navigate through the options or adjust an option.Press 3or4to select Picture menu, press 6to access the menu.2Press MENU to return to previous menu. Press EXIT to exit the menu screen directly.4Option DescriptionSelects a desired picture mode. You can select from Dynamic, Standard, Mild and User.Standard: Select for a standard picture.Mild: Select for a finely detailed picture.Dynamic: Select for a bright and vivid picture.User: The picture quality you set.Picture ModeContrastBrightnessSharpnessAdjusts image contrast.Colour TempAdjusts screen brightness for easier viewing of dark picture such as night scenes and black hair.Adjusts image sharpness and displays a sharp image.Selects one of three automatic colour adjustments. Sets to Warm to enhance hotter colours suchas red, or set to Cool to see less intense colours with more blue. You can select from Warm,Cool and Normal.Colour Adjusts colour saturation.Tint Adjusts tint for image.Aspect Ratio You can select the aspect ratio (display proportions) according to your video signal type or personalpreference. You can select from 16:9, 4:3, Auto, Zoom1, Zoom2 and 1:1pixel mapping.16:9: Displays a 16:9 picture.Zoom1: Stretches the vertical length of the picture.Zoom2: Stretches the horizontal width and vertical length of the picture.Auto: Displays picture automatically in proper ratio.4:3: Displays a 4:3 picture.Note: The Tint item is only for NTSC system.Note: 1. To quickly change the picture mode, press the P.MODE button on the remote control repeatedly.2. The Dynamic mode is recommended for store use. When the set is switched on in this mode, an on-screen warning tothat effect will appear.1:1 pixel mapping (D-SUB, HDMI only): Displays an input source without scaling it. (This option isavailable on either of these two conditions: ① native resolution=1920x1080, inputresolution=1080P or 1920x1080; ②native resolution=1366x768, input resolution=1360x768).Note: Be sure not to put anything around the sensor, as its function may be affected.Picture Sound Time Setup Lock ChannelPicture Mode UserContrast 75Brightness 45Sharpness 50Colour 50Select Move Menu ReturnTint 0Prev Page Next PagePicture Adjustment22Note: 1. You can press the ZOOM button repeatedly to select a desired aspect ratio.2. For the sake of protecting the screen, please do not display the image in 4:3 mode for extended period of time.Noise Reduction Select from Low/Middle/High to reduce noise in the picture, commonly called snow.Select Off to turn off this function.Select On to adjust the picture’s reproduction rate (available when the TV’s aspect ratio is in 4:3 or16:9 and the input signal is in video format).Overscan(D-SUB,HDMI only)Light Sensor Select Auto to enable the automatic brightness control. The light sensor measures the roombrightness which allows the TV to automatically adjust the picture brightness, based on the ambientroom light conditions. You can check the light sensor to know whether it is dark, normal or bright.Picture Sound Time Setup Lock ChannelAspect RatioNoise ReductionSelect Move Menu ReturnOffPrev Page Next Page16:9Colour Temp CoolScreenOverscan OnLight Sensor Auto: Normal