Sanyo LCD-40XZ10F Instruction Manual

Also see for LCD-40XZ10F: Service manual

Screen Setup for D-SUB(PC) ModeBefore adjusting the screen, make sure that you select the correct source (D-SUB).32Option DescriptionAuto adjustH-OffsetSizePhaseSelects and activates to start auto adjustment. The set automatically adjusts the image settings,such as position and phase.Moves the image on the screen left or right.Adjust the horizontal width of the image on the screen.Improves the focusing of a stable image.Screen Setup4 Press 5,6,3,4to navigate through the options or adjust an option. To confirm, press OK.Press MENU and the main menu screen displays.25V-Offset Moves the image on the screen up or down.Press MENU to return to previous menu. Press EXIT to exit the menu screen directly.3 Within the menu, press 5or 6to scroll through the page upward or downward until you select the Screenitem, then press 4or OK to access.Press 3or4to select the Picture menu, press 6to access the menu.1Picture Sound Time Setup Lock ChannelH-Offset 50V-Offset 50PhaseSize 0Select Move Menu Return60Auto AdjustPicture Sound Time Setup Lock ChannelAspect RatioNoise ReductionSelect Move Menu ReturnOffPrev Page Next Page16:9Colour Temp CoolScreenOverscan OnLight Sensor Auto: Normal