Sanyo PLC-SW30 Owner's Manual

Also see for plc sw30 - SVGA LCD Projector: Owner's manual Specifications Service manual Service manual Service manual

21Basic OperationMessage disappears after 4 seconds.Press P-Timer button on the remote control. The timer display “00 :00” appears on the screen and the timer starts to count time (00 : 00~ 59 : 59).To stop P-Timer display, press the P-TIMER button. And then, pressP-TIMER button again to cancel P-Timer function.12Press MENU button to display the On-Screen Menu. Press Point7 8 buttons to move the red frame pointer to SOUND Menuicon.VolumePress VOLUME (+/–) button on the remote control or on the topcontrol to adjust volume. The volume dialog box appears on thescreen for a few seconds.VOLUME (+) button to increase volume, and VOLUME (–) button fordecreasing.MutePress MUTE button on the remote control to cut off sound. Torestore sound to its previous level, press MUTE button again or pressVolume (+/–).To increase volume, press Point 8 button, and press Point 7 button todecrease volume.Press Point 7 8 buttons to mute sound. Dialog box display is changedto “On” and sound is muted. To restore sound to its previous level,press Point7 8 buttons again.Press Point d button to move the red frame pointer to the itemthat you want to select, and then press SELECT button. Indicates approximatelevel of volume.Close Sound Menu.Direct OperationMenu OperationVolumeMuteIndicates approximatelevel of volume.The display disappears after 4 seconds.SOUND MENUSound Menu iconSound AdjustmentP-Timer FunctionNo Show FunctionPress MUTE button to setMute function On or Off.Press NO SHOW button on the remote control to black out the image.To restore to normal, press the NO SHOW button again or press anyother button. When a projected image is captured and set as “User”in the Logo item in the Setting menu ( ☞ P36 ), the screen changeseach time you press the NO SHOW button as follows :black out ➜ the captured image ➜ normal ➜......Downloaded From projector-manual.com Sanyo Manuals