35Video InputScreen Size AdjustmentThis projector has a picture screen resize function, which enables you to display the desirable image size.Press MENU button to display the On-Screen Menu. PressPoint 7 8 buttons to move the red frame pointer to ScreenMenu icon.Press Point d button and move the red frame pointer to thefunction that you want to select and then press SELECT button.12Note: The Screen Menu cannot be operated when“720p,” “1035i,” or “1080i” is selected on theAV System Menu( ☞ P32 ).Move the red frame tothe function and pressSELECT button.SCREEN MENUScreen Menu iconProvides image at a wide screen ratio of 16 : 9.WideProvides image at a normal video aspect ratio of 4 : 3.NormalTo store the adjustment data, move the red frame pointer toStore icon and press SELECT button. Image Level Menu willappear. Move the red frame pointer to the Image Level 1 to 4and then press SELECT button.Image Level MenuMove the red framepointer to the imageicon to be set andthen press SELECTbutton.Store iconReset all adjustment to previous figure.ResetStoreCloses the Image Menu.QuitWhen this function is "ON", it automatically enhances contrast ofbright and dark part of image.Auto grayscaleInterlace video signal can be displayed in a progressive picture.Off ···· Not activated.L1 ···· Select “L1” for an active picture.L2 ···· Select “L2” for a still picture.progressiveNote : The Progressive cannot be selected when 1080i, 1035i, 480p, 575p,or 720p is selected.Downloaded From projector-manual.com Sanyo Manuals