Sanyo PLC-SW30 Owner's Manual

Also see for plc sw30 - SVGA LCD Projector: Owner's manual Specifications Service manual Service manual Service manual

4Safety InstructionCAUTION IN CARRYING OR TRANSPORTINGTHE PROJECTOR– Do not drop or bump a projector, otherwise damages ormalfunctions may result.– When carrying a projector, use a suitable carrying case.– Do not transport a projector by using a courier or transportservice in an unsuitable transport case. This may causedamage to a projector. To transport a projector through acourier or transport service, consult your dealer for bestway.Moving the ProjectorCAUTIONCarrying Bag (supplied) is intended for protection from dustand scratches on the surface of a cabinet, and it is notdesigned to protect an appliance from external forces. Do nottransport a projector through a courier or transport serviceswith this bag, otherwise the projector can be damaged. Whenhandling a projector, do not drop, bump, subject it to strongforces or put other things on the cabinet.When moving the projector, replace the Lens Cover andretract Adjustable Feet to prevent damage to the lens andcabinet.When the projector is not in use for an extended period, putit into the case (carrying bag) supplied with the projector.20˚20˚Do not tilt the projector more than 20degrees to either side.Do not point the projector up to pro-ject an image.Do not point the projector down toproject an image.Do not put the projector on eitherside to project an image.Install the projector properly. Improper Installation may reducethe lamp lifetime and cause a fire hazard.NO UPWARDNO DOWNWARDNO SIDEWARDInstalling the Projector in Proper PositionOpenings in the cabinet are provided for ventilation and toensure reliable operation of the product and to protect it fromoverheating, and these openings must not be blocked orcovered.CAUTIONHot air is exhausted from the exhaust vent. When using orinstalling the projector, the following precautions should betaken.– Do not put any flammable objects near the vent.– Keep the exhaust vent at least 3’(1m) away from anyobjects.– Do not touch a peripheral part of the exhaust vent, espe-cially screws and metallic part. This area will become hotwhile the projector is being used.– Do not put anything on the cabinet. The materials put onthe cabinet will not only get damaged but also cause firehazard by heat.Cooling fans are provided to cool down the projector. Thisprojector monitors internal temperature and control the run-ning speed of the cooling fans.Air CirculationAir Intake VentExhaust Vent(Hot air exhaust)Downloaded From projector-manual.com Sanyo Manuals