Sanyo PLC-SW30 Owner's Manual

Also see for plc sw30 - SVGA LCD Projector: Owner's manual Specifications Service manual Service manual Service manual

34Video InputPress Point 7 8 buttonsto adjust value.Press MENU button to display the On-Screen Menu. PressPoint 7 8 buttons to move the red frame pointer to IMAGEADJUST Menu icon.12 Press Point d button to move the red frame pointer to the itemthat you want to adjust and then press SELECT button. Thelevel of each item is displayed. Adjust each level by pressingPoint 7 8 buttons.Move the red frame point-er to the item to be select-ed and then press SELECTbutton.IMAGE ADJUST MENUImage Level AdjustmentPress Point 7 8 buttons to adjust the image contrast. (From 0 to 63.)Press Point 7 8 buttons to adjust the image brightness. (From 0 to 63.)ContrastBrightnessPress Point 7 8 buttons to obtain better balance of contrast. (From 0to 15.)GammaPress SELECT button at thisicon to display other items.Image AdjustMenuPress Point 7 8 buttonsto adjust value.Press Point 7 8 buttons to adjust color intensity. (From 0 to 63.)Press Point 7 8 buttons to obtain proper color. (From 0 to 63.)ColorTintPress Point 7 8 buttons to adjust the image sharpness. (From 0 to 15.)SharpnessPress Point 7 8 buttons to adjust the red tone. (From 0 to 63.)White balance (Red)Press Point 7 8 buttons to adjust the green tone. (From 0 to 63.)White balance (Green)Press Point 7 8 buttons to adjust the blue tone. (From 0 to 63.)White balance (Blue)NOTE : Tint cannot be adjusted when the videosystem is PAL, SECAM, PAL-M or PAL-N.Press SELECT button at this iconto store the value.Press Point 7 8 buttons to select the Color temp. level that youwant to select. (XLow, Low, Mid, or High)Color temp.Downloaded From projector-manual.com Sanyo Manuals