Sanyo PLC-UF10 Owner's Manual

Also see for UF10 - PLC UXGA LCD Projector: Specifications Instruction manual

12CONNECTING PROJECTORANALOG RGBR/Pr G/Y B/Pb H/HV VCONTROL PORTDVIINPUT 1R/C JACK USBRESET(MONO) (MONO)(MONO)(MONO)(MONO)CONTROL PORTAUDIOCONTROL PORTS-VIDEOVIDEO/Y CINPUT 2INPUT 3INPUT 4AUDIOAUDIOAUDIOSERIAL PORT INSERIAL PORT OUTAUDIO OUTR L R LR LRRLLWhen controlling computerwith Remote Control of thisprojector, connect mouse portof your personal computer tothese connectors. (Refer toP14.)Connect S-VIDEO outputfrom video equipment tothis jack. (Refer to P15.)Connect audio outputfrom computer or videoequipment to these jacks.(Refer to P14, 15.)CONTROL PORT CONNECTORSAUDIO INPUT JACKS5 BNC INPUT JACKSS-VIDEO INPUT JACKConnect component video output (Cr, Y,Cb or Pr, Y, Pb) from video equipment toR/Pr, G/Y and B/Pb jacks or connectcomputer output [5 BNC Type (Red,Green, Blue, Horiz. Sync and Vert.Sync.)] from computer to R/Pr, G/Y,B/Pb, H/HV and V jacks. (Refer to P14,15)Connect computer output(Digital/Analog DVI-I type)to this terminal.(Refer to P14.)DVI INPUT TERMINALINPUT/OUTPUT TERMINALS AND JACKSConnect computer output(Analog HDB 15-pin type) tothis terminal.(Refer to P14.)HDB 15-PIN INPUT TERMINALAV INPUT (VIDEO/Y, C) JACKSConnect composite video output fromvideo equipment to VIDEO/Y jack orconnect Separate Y/C video outputs toVIDEO/Y and C jacks. (Refer to P15.)INPUT 2 INPUT 1 INPUT 1, 2, 3, 4INPUT 1, 2, 4INPUT 3INPUT 4INPUT 3