Sanyo PLC-UF10 Owner's Manual

Also see for UF10 - PLC UXGA LCD Projector: Specifications Instruction manual

23KEYSTONE ADJUSTMENT1 Press KEYSTONE / button on Remote Control Unit or selectKeystone on SETTING menu. (Refer to page 40.) Keystonedialog box appears.2 Correct keystone distortion by pressing KEYSTONE / buttonor POINT UP/DOWN button(s). Press KEYSTONE button orPOINT UP button to reduce upper part of image, and pressKEYSTONE button or POINT DOWN button to reduce lowerpart.Reduce upper width with KEY STONE button orPOINT UP button.Reduce lower width with KEY STONE button orPOINT DOWN button.If a projected picture has keystone distortion, correct image with KEYSTONE adjustment.ADJUSTING SCREENMessage disappears after 4 seconds.Message disappears after 4 seconds.ZoomFocusZOOM ADJUSTMENTFOCUS ADJUSTMENT1 Press ZOOM / button on Side Control or on Remote ControlUnit. Message “Zoom” is displayed.2 Press ZOOM button to make image larger, and press ZOOM button to make image smaller.1 Press FOCUS / button on Side Control or on Remote ControlUnit. Message “Focus” is displayed.2 Adjust focus of image by pressing FOCUS / button(s) .LENS SHIFT ADJUSTMENTBASIC OPERATIONMessage disappears after 4 seconds.Lens shift1 Press the LENS SHIFT button on Side Control or on the RemoteControl Unit. Message “Lens shift” is displayed.2 Press POINT UP button to move image up, press POINT DOWNbutton to move image down, press POINT LEFT to move imageleft and press POINT RIGHT to move image right.