Sanyo PLC-UF10 Owner's Manual

Also see for UF10 - PLC UXGA LCD Projector: Specifications Instruction manual

2512Press MENU button and ON-SCREEN MENU will appear. PressPOINT LEFT/RIGHT buttons to move a red frame pointer toSOUND Menu icon.VolumePress VOLUME (+/–) button(s) on Side Control or on Remote ControlUnit to adjust volume. Volume dialog box appears on screen for a fewseconds.(+) button to increase volume, and (–) button for decreasing.MutePress MUTE button on Remote Control Unit to cut off sound. Torestore sound to its previous level, press MUTE button again or pressVolume (+/–) button(s).To increase volume, press POINT RIGHT button, and press POINTLEFT button for decreasing.Press POINT LEFT/RIGHT button(s) to cut off sound. Dialog boxdisplay is changed to “On” and sound is cut off. To restore sound toits previous level, press POINT LEFT/RIGHT button(s) again.Press POINT DOWN button to move a red frame pointer to itemthat you want to select, and then press SELECT button.Indicates roughlylevel of volume.Close SOUND Menu.SOUND ADJUSTMENTDIRECT OPERATIONMENU OPERATIONVolumeMuteIndicates roughly level ofvolume.Press MUTE button to setMute function On or Off.Display disappears after 4 seconds.SOUND MENUSOUND Menu iconTrebleTo adjust Treble sound, press POINT RIGHT button or POINT LEFTbutton.BassTo adjust Bass sound, press POINT RIGHT button or POINT LEFTbutton.Built-in SP.OnCloses SOUND MENU.QuitPress POINT LEFT/RIGHT buttonsto adjust value.BASIC OPERATIONPress POINT LEFT/RIGHT button(s) to switch built-in speaker on andoff.